Libera tu hombro sin un portaequipajes trasero
Transición a caminar en 10 segundos
Diseño impermeable y resistente a cargas pesadas
No se pudo cargar la disponibilidad de recogida
Envío estándar gratuito dentro de EE. UU., excepto Alaska, Hawái, Puerto Rico, Islas Vírgenes, Guam e Islas Marshall.
Devoluciones sin complicaciones de artículos en su embalaje original; abrirlo para inspeccionarlo no supone ningún problema.
La libertad es lo que buscamos. El compromiso no es una opción.
La única mochila de ciclismo de liberación rápida del mundo que se monta en tu bicicleta sin necesidad de un portaequipajes trasero.
Traslada la carga de tu espalda a tu bicicleta mientras pedaleas, y se desacopla instantáneamente cuando te bajas.
Cambie instantáneamente entre dos modos
Compatible con tijas de sillín redondas (25 mm–35 mm).
Las tijas de sillín no redondas (como las tijas aerodinámicas) requieren accesorios funcionales adicionales.
Sillín de doble carril + suficiente espacio de instalación
No, esta mochila utiliza un sistema único de bloqueo Penta-lock de cinco puntos. Una vez instalada, es completamente segura incluso en carreteras con baches a alta velocidad. Para el uso diario, el bloqueo de tres puntos ya es suficientemente estable.
No, esta mochila está diseñada para brindar estabilidad. Se mantiene segura en la bicicleta, se ajusta al cuerpo del ciclista, se alinea con el centro de gravedad y es prácticamente invisible al andar. Incluso completamente cargada, no afecta la estabilidad, lo que garantiza una conducción segura.
La mochila tiene una carga máxima estándar de 15 kg, ideal para uso diario. En pruebas estáticas extremas, ha soportado con éxito más de 80 kg.
Sí, la mochila está fabricada con tejido repelente al agua con clasificación IPX5 e incluye una funda impermeable para mayor protección. También estamos desarrollando una versión totalmente impermeable para condiciones extremas.
La instalación solo se realiza una vez y tarda entre 10 y 20 minutos. Incluye una guía de usuario y un kit de herramientas, por lo que no se necesitan herramientas adicionales.
Montar la mochila en la bicicleta toma unos 10 segundos y desmontarla menos. Es rápido, fácil y sin esfuerzo.
Sí, es compatible, pero se requiere nuestro accesorio específico para tijas de sillín no redondas, que se vende por separado. Es compatible con la mayoría de las tijas de sillín no redondas. Para más información, consulta la página del accesorio para tijas de sillín no redondas.
Al usar la mochila EasiCyco, dado que ocupa espacio detrás del sillín, recomendamos montar a horcajadas por delante para facilitar su montaje y desmontaje. Puede consultar el tutorial para obtener ayuda.
La mochila cuenta con un compartimento específico para portátil de 39 × 27 × 1,5 cm, apto para portátiles estándar de 16 pulgadas. El compartimento también cuenta con un acolchado grueso y un forro de terciopelo resistente a los arañazos.
1. Sí, es compatible con tijas de sillín de carbono. Asegúrese de que el par de apriete no supere los 4 Nm al instalar accesorios montados en la tija. Si se utiliza según lo previsto y dentro de los límites de carga recomendados, está diseñado para funcionar de forma segura con tijas de sillín de carbono.
Sí, se puede quitar. Cuando no se necesita la función de flotación, el sistema de soporte interno se puede extraer fácilmente de la parte inferior de la mochila, lo que permite usarla como una mochila normal.
Apenas añade peso: unos 140 g. Además, incluimos almohadillas protectoras con los accesorios para evitar arañazos en tu bicicleta.
En absoluto. Nuestro producto está diseñado teniendo en cuenta el espacio libre para la instalación, no la altura del usuario. Al instalarlo, simplemente asegúrese de que haya aproximadamente 3,8 cm de espacio entre el neumático y la parte inferior de la mochila.
Sí, es compatible con tijas de sillín aerodinámicas de diferentes formas. Sin embargo, recomendamos usar nuestro adaptador específico para tijas de sillín no redondas. Sin él, puede haber una ligera reducción en la estabilidad en comparación con las tijas redondas, pero esto no afectará el control general de la conducción.
Si ya hay una luz trasera fija instalada en la tija del sillín, es posible que quede parcialmente obstruida por la bolsa. Para solucionar esto, hemos diseñado una correa de cincha específica en la parte inferior delantera de la bolsa para sujetar la luz trasera.
Recomendamos utilizar una luz trasera de liberación rápida o, alternativamente, mantener una luz adicional montada en la propia bolsa para garantizar la visibilidad y la seguridad durante la conducción nocturna.
Mochila multiusos
Diseñada con múltiples compartimentos y espacios de almacenamiento bien organizados, esta mochila es ideal para quienes valoran la organización. Ya sea para el día a día o para viajar, te ayuda a mantener todas tus pertenencias ordenadas y al alcance de la mano.
Mochila con cierre enrollable
Con un elegante diseño enrollable, esta mochila ofrece una mayor capacidad, ideal para transportar objetos voluminosos o para viajes largos. En comparación con la versión multiusos, cuenta con menos compartimentos y se centra más en un espacio de almacenamiento abierto y flexible.
Para obtener más detalles, consulte la sección de Características principales.
Utilizamos un diseño de extensión ajustable en dos etapas, lo que permite un ajuste flexible de la longitud para adaptarse a diferentes posiciones del sillín.
I cycle to work every day, enjoy a mid- length weekend ride, and have done a bit of touring, so thought this was a worthwhile investment as I don't really like classic panniers.
Pros:
- bag itself is good quality, good number of pockets/compartments, very spacious, seems sturdy enough. Mounting parts are easily removable so can be used as a regular backpack if needed
- sits directly behind you, so no uneven weight distribution or anything that's much wider than you are
Cons:
- the bag does press up against your backside if there is anything in it. I don't mind this too much for a short commute, but can see it getting annoying in the heat or over longer distances
- the connecting post is just too short. If I had my seat any further back it wouldn't be usable at all. Appreciate it can't be too long or it risks too much leverage or wobbling all over the place, but I'd like to be able to adjust my saddle without the connector becoming useless
- the rings designed to hold the clip straps in place on the seat rails would only work if your rails are a very specific size and shape. They aren't 100% functionally necessary, but if they were this would be really annoying
The most annoying part:
- doesn't clip in anywhere near as easily as it looks/says. You have to push the post into the slot to exactly the right position and it doesn't lock automatically. You have to push the clip down so if it's not in the right place you can't immediately tell and it has fallen off a few times. Not sure if mine arrived broken but if not this seems like a massive design flaw.
Can be tricky to get out for the same reason, you have to get the distance/angle exactly right or it doesn't really work and it gets stuck.
For what it costs I would really expect it to work more smoothly than this, it has been quite frustrating at times.
Hi,
Thank you very much for your honest and detailed feedback! Your comments are extremely valuable to us and will help us continue improving and upgrading the product. At the same time, we’re sincerely sorry for the inconvenience and frustration this has caused you.
Regarding the issues you mentioned:
1. The backpack pressing against your backside
We understand this can be uncomfortable, especially on longer rides or in warm weather. We’re currently considering developing a saddle-mounted accessory that would push the upper part of the backpack slightly away from your body, which we hope to launch next year.
2. The support rod being too short
We can provide you with a longer support rod. EasiCyco 2.0 will also include improvements to this part for better adjustability.
3. The rings on the saddle rails
We already have a new design that removes these rings while ensuring the buckle stays securely in place without sliding up and down. We expect to launch this together with EasiCyco 2.0.
4. Difficulty inserting the support rod
There may occasionally be a slight manufacturing deviation in the button position, which can prevent the rod from locking properly. We’ve confirmed that this can happen with a very small number of units, and we’re truly sorry if yours is one of them. We’d be happy to provide you with a new clamp and support rod as a replacement.
It may also be more difficult to insert when the backpack is fully loaded, as the shorter rod requires a more precise angle.
5. Difficulty removing the support rod
When removing it, please push the support rod fully toward the seatpost first. This gives the button enough space to be pressed down and makes removal much easier.
Once again, thank you for your honest feedback. It’s genuinely helpful to us as we continue improving the product. Please let us know if you’d like us to send you a replacement clamp and a longer support rod.
Ray
EasiCyco Team
Non parlo inglese
Installation was simple. Not sure I will have enough room however, once I add weight into the backpack since it barely clears over an inch without rubbing my rear tire.
Hi Diego, thanks for your feedback! We'll keep in mind the space concern and hope the backpack works well for your needs. Feel free to reach out if you need any assistance.Hi!
If you’re concerned about the clearance between the backpack and your rear tire, we currently have a new accessory that can increase the installation angle, allowing the backpack to sit farther away from the rear tire.
That said, based on your current setup, it should be completely fine to use as it is. However, if you’re still concerned, we’d be more than happy to send you this accessory for free to give you some extra clearance.
Also, our EasiCyco 2.0 is currently in development, and it will solve this issue even better without needing this additional accessory.
We hope this solution can help and give you a better experience with EasiCyco!
Product seems great so far. Is well made, was reasonably easy to setup and is a good size.
My only concern is I commute in Lycra and I am having a bit of contact with the bag which could rub and wear the Lycra.
The overall design works well - I used it on a 585 mile ride from Buffalo to NYC on the Empire State Trail. What would help is to increase the length of the primary support post; when the bag is full, it's difficult to install into the seat post bracket.
Hi! We’re glad to hear that the overall design worked well for you, especially that you completed such an impressive 585-mile ride with it!
May we ask if you’ve extended the support post to the second level? Our support post has two extension levels. If you’ve already fully extended it to the second level and it’s still not long enough, we can provide you with an extension support bar for free.
Also, our EasiCyco 2.0 is currently in development, and it will solve this issue much better. It’s expected to be released around October, so please stay tuned!
¡Gracias por suscribirte!
¡Este correo electrónico ha sido registrado!